Products

This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" to 3-1/2" mandrel-bent 409 stainless steel and comes complete with free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of...

The Hi-Tuck "Rock Basher" Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system...

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware...

This tip upgrade is constructed using 304 stainless steel for maximum strength and durability. This exhaust system is finished off with a Hi-Tuck tip to give you extra ground clearance during extreme angle climbs or descents protecting the exhaust over rough terrain. Simple, hassle-free,...

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo. Exhaust Valve: This down-pipe...

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo. Exhaust Valve: This down-pipe...

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo. Exhaust Valve: This down-pipe...

Testing In testing, the axle-back exhaust system resulted in gains up to +7 horsepower and +10 lbs. x ft. of torque verified by our in-house dyno. Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system...

This cat-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position...

This cat-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position...

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system for the 2010-2017 Nissan Patrol (Y62) with the V8-5.6L (400 hp) engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" mandrel-bent 304 stainless steel tubing and comes...

aFe is proud to introduce an all new Mach Force-Xp cat-back exhaust system. In testing, this system resulted in gains up to +11 horsepower and +14 lbs. x ft. of torque verified by our in house dyno. This cat-back exhaust system utilizes full 3"...

aFe is proud to introduce an all new Mach Force-Xp cat-back exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L and V8-5.0L engine. In testing, this system resulted in gains up to +11 horsepower and +14 lbs. x ft. of torque verified by...

aFe is proud to introduce an all new MACH Force-Xp cat-back dual exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L & V8-5.0L engine. In testing, this system resulted in gains up to +12 horsepower and +10 lbs. x Ft. of torque verified...

aFe is proud to introduce an all new MACH Force-Xp cat-back dual exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L & V8-5.0L engine. In testing, this system resulted in gains up to +12 horsepower and +10 lbs. x Ft. of torque verified...

This cat-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position...

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system for the 2010-2017 Nissan Patrol (Y62) with the V8-5.6L (400 hp) engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" mandrel-bent 304 stainless steel tubing and comes...

This cat-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position...

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are...

aFe is proud to introduce an all new MACH Force-Xp cat-back exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L & V8-5.0L engine. In testing, this system resulted in gains up to +12 horsepower and +10 lbs. x Ft. of torque verified by...

This MACH Force-Xp Cat-Back exhaust system is constructed of 3" mandrel-bent stainless steel tubing and comes complete with free-flowing high temp black powder-coated muffler, OE style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of...

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform...

aFe is proud to introduce an all new MACH Force-Xp cat-back exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L & V8-5.0L engine. In testing, this system resulted in gains up to +12 horsepower and +10 lbs. x Ft. of torque verified by...

This MACH Force-Xp Cat-Back exhaust system is constructed of 3" mandrel-bent stainless steel tubing and comes complete with free-flowing muffler, OE style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps...

Performance Gains: This system produced gains of up to +11 HP and +15 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel tubing...

Performance Gains: This system produced gains of up to +11 HP and +15 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel tubing...

This system produced gains of up to +18 HP and +27 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features...

Testing In testing, the axle-back exhaust system resulted in gains up to +7 horsepower and +10 lbs. x ft. of torque verified by our in-house dyno. Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing...

Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Exhaust Valve: This axle-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. Due to the state-of-the-art computer-aided technology utilized to design...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. Due to the state-of-the-art computer-aided technology utilized to design...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. Due to the state-of-the-art computer-aided technology utilized to design...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. The state-of-the-art computer-aided technology utilized to design this system provides a precise fitment and provides a hassel-free install.This Part Fits: Year Make Model Submodel 2017-2019 Audi A4...

With mandrel-bent stainless steel tubing, a rear muffler delete, and aggressive looking tips, this MACH Force Xp exhaust system exceeds in all area the factory system didn’t.This Part Fits: Year Make Model Submodel 2015-2017 Volkswagen GTI Autobahn 2015-2017 Volkswagen GTI S 2015-2017 Volkswagen GTI...

With mandrel-bent stainless steel tubing, a rear muffler delete, and aggressive looking tips, this MACH Force Xp exhaust system exceeds in all area the factory system didn’t.This Part Fits: Year Make Model Submodel 2015-2017 Volkswagen GTI Autobahn 2015-2017 Volkswagen GTI S 2015-2017 Volkswagen GTI...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system...

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware...

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware...

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware...

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform...

Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and...

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes...

aFe power introduces the MACH Force-Xp cat-back exhaust system for the 2005-2012 Toyota Tacoma with L4-2.7L engine. This cat-back exhaust is constructed out of 2-1/2 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are...

In recent testing this Mach Force XP cat-back exhaust system produced 10 horsepower and 9 lbs. x ft. of torque. This exhaust system is constructed out of mandrel bent, 2.50 IN stainless steel and includes MIG welded hangers and OE style band clamps for...