Engine

The Edelbrock #9783 Exhaust Valve is a 1.66" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60579, #61579 & #61599 Cylinder Heads Overall Length: 5.110" Set of 1 Valve

The Edelbrock #9781 Intake Valve is a 2.11" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60579, #61579 & #61599 Cylinder Heads. Overall Length: 5.093" Set of 1 Valve

Edelbrock #9752 Exhaust Valve is a 1.66" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #60599 Cylinder Heads. +.120" Longer than Stock. Overall Length: 5.230". Set of 1 Valve

The Edelbrock #9786 Exhaust Valve is a 1.60" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #77619, #77629, #77639 & #77649 Cylinder Heads Overall Length: 5.020" Set of 1

The Edelbrock #9784 Intake Valve is a 2.08" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #77619, #77629, #77639 & #77649 Heads. Overall Length: 5.010" Set of 1 Valve

Edelbrock part #72018 Bulk Pack Intake Gaskets for 1958-1986 Small-Block Chevy allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N...

Edelbrock part #72208 Bulk Pack Intake Gaskets for 1963-1996 Small-Block Fords allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N...

Larger-than-stock throttle bodies deliver increased performance by allowing more air to enter the engine. The Edelbrock 103mm Throttle Body #38988 features analog electronics and is designed for use with the 2015-17 Ford Mustang Modular Inlet Supercharger. This throttle body is also required when purchasing...

The Edelbrock #5085 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised exhaust ports and larger diameter...

The Edelbrock #5027 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised exhaust ports and larger diameter springs for higher...

The Edelbrock #5028 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised exhaust ports and larger diameter springs for higher...

Edelbrock Part #7521 RPM Air-Gap intake manifold is designed for the small-block 302 CID Ford V8 or 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that?s been used on our Victor Series competition intakes and is the perfect manifold for hot...

The Edelbrock Victor Jr. 2V Sportsman #6940 is a replacement carburetor base gasket for Edelbrock #2901, 2912 and 2940 intake manifolds.

Edelbrock part #7232 replacement base and upper plenum gasket for #2945 & 3887 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality...

Edelbrock part #2992 Victor 18 Degree Spider base is the bedding plate portion of a two-piece (valley plate and spider) manifold system. This Spider base is intended for use with "Conventional" 18-degree SBC heads on a standard deck engine block. This plate is more...

Edelbrock part #7576 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. This RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. The Air-Gap design...

Edelbrock Rollin' Thunder Camshaft #2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily...

Edelbrock part #3882 Performer RPM 5.8L Upper Plenum Only (includes plenum cover) is designed for 1988-96 Ford 5.8L, EFI, truck engines. The modular design of this intake manifold incorporates the latest air flow technology for maximum torque gains in the mid-range. This Upper Plenum...

Edelbrock part #7564 RPM Air-Gap 351C intake manifold design utilizes the same race-winning technology that's been used on Edelbrock's Victor Series competition intakes for many decades. Designed to improve performance on the street or racetrack, this manifold features an open space that separates the...

Edelbrock part #3832 replacement base and plenum cover gaskets for Edelbrock #3821 intake manifold are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock...

Edelbrock part #3833 replacement base and plenum cover gaskets for Edelbrock #3841 & #3881 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top...

The Edelbrock #7382?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with...

Edelbrock part #29365 Victor FE EFI intake manifold is designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines. The single-plane design provides race-winning power for many types of competition. Carb flange height is equal to the Ford high-riser manifold #C4AE-9424-G to fit under 427...

Edelbrock part #2098 Performer RPM Top End Kit is designed for 1957-86 Small-Block Chevy 350 V-8 engines. This Top End Kit produced 410 HP & 408 TQ on a 350 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from...

Edelbrock part #2099 Performer RPM Top End Kit is designed for 1957-86 Small-Block Chevy 327-350 V-8 engines. This Top End Kit produced 435 HP & 435 TQ on a 350 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from...

Edelbrock part #2097 Performer RPM Top End Kit is designed for 1987 & later Small-Block Chevy 383 V-8 engines. This Top End Kit produced 435 HP & 435 TQ on a 350 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street...

Edelbrock part #3841 Performer Truck 5.0 EFI intake manifold fits 1987-96 Ford 5.0L EFI V8 truck engines. The modular design incorporates the latest air flow technology for maximum torque gains in the mid-range where trucks need it most. The upper and plenum cover are...

Edelbrock part #3884 Performer 5.8L EFI intake manifold base is designed for 1988-96 Ford 5.8L, EFI, truck engines. This intake manifold base manifold is CNC port matched to upper manifold for maximum performance.This Part Fits: Year Make Model Submodel 1988-1992 Ford F-150 Custom 1995-1996...

Edelbrock part #3881 Performer 5.8L EFI intake manifold is designed for 1988-96 Ford 5.8L, EFI, truck engines, the modular design of this manifold incorporates the latest air flow technology for maximum torque gains in the mid-range. This manifold made 34 ft-lbs. more torque than...

The Edelbrock #3830 replacement gasket set is for Edelbrock #3824 65mm and #3825 70mm throttle bodies and #3827/#3828 EGR plates

Edelbrock #9680 Head Bolt Bushings with Integral Washers must be used on 289-302 S/B Ford Engines with 7/16" Head Bolts. Complete Set of 20 High Quality Head Bolt Bushings. Use with Edelbrock Head Bolt Kit #8552 or Stock 7/16" Head Bolts.This Part Fits: Year...

Edelbrock #9693 7/16" to 1/2" Bushing Washer Kit allows the use of Stock or Edelbrock 7/16" Head Bolts with 1/2" Bolt Holes on pre-1970 AMC engines. Use with Edelbrock #60129/60139 Performer AMC and #60109/60119 RPM AMC Cylinder Heads.

Edelbrock part #7233 replacement base and upper plenum gasket for #7123 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets...

Edelbrock part #7231 replacement base and upper plenum gasket for #7126 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets...

The Edelbrock #3831 replacement gasket set is for Edelbrock #3826 75mm throttle bodies and #3829 EGR plate

The Edelbrock #8554 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate the need for valve train removal...

Edelbrock #9368 Exhaust Valve is a 1.60" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #60779 & #60179 Cylinder Heads Overall Length: 5.000". Set of 8 Valves

Edelbrock #9318 Exhaust Valve is a 1.68" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #60519 Cylinder Heads Overall Length: 4.780". Set of 8 Valves

Edelbrock #9373 Exhaust Valve is a 1.60" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #77169, 77179, 77189, 77199, 77359 Cylinder Heads Overall Length: 5.060". Set of 8 Valves

Edelbrock #9363 Exhaust Valve is a 1.90" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #61409 & 77409 Cylinder Heads Overall Length: 5.488" (+.100). Set of 8 Valves

The Edelbrock #93773 Exhaust Valve is a 1.76" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60679, #60699, #61669 & #61649 Cylinder Heads. Overall Length: 5.050". Set of

The Edelbrock #9366 Intake Valve is a 2.02" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60779 & #60179 Cylinder Heads. Overall Length: 4.980". Set of 8 Valves

The Edelbrock #9361 Intake Valve is a 2.30" 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Fits Edelbrock #61409 & #77409 Cylinder Heads. Overall Length: 5.625". Set of 8 Valves

The Edelbrock #9376 Intake Valve is a 2.072" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60519 Cylinder Heads. Overall Length: 4.756". Set of 8 Valves

The Edelbrock #9371 Intake Valve is a 2.05" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock 77169, 77179, 77189, 77199 & 77359 Heads. Overall Length: 5.060". Set of 8 Valves

The Edelbrock #97041 Intake Valve is a 2.25" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut 11/32" stem. Fits Edelbrock #61459, #61559 & #61555 Cylinder Heads. Overall Length: 5.350" Set of 8 Valves

The Edelbrock #93771 Intake Valve is a 2.19" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock 60679, 60699, 61669 & 61649 Cylinder Heads. Overall Length: 5.265". Set of 8 Val

The Edelbrock #9776 Exhaust Valve is a 1.88" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60459, #60479, #60499, #60559 & #60439 Cylinder Heads OAL: 5.450" Set of 8

The Edelbrock #9775 Intake Valve is a 2.19" 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Fits Edelbrock #60459, #60479, #60499 & #60559 Heads. Overall Length: 5.314" Set of 8 Valves

The Edelbrock #9773 Exhaust Valve is a 1.55" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60797 Cylinder Heads Overall Length: 4.930" Set of 8 Valves