Engine

The Edelbrock 3814 Intake elbow was developed by the Edelbrock engineering team using the latest in Computational Fluid Dynamic (CFD) software. Edelbrock Throttle Body Elbows are the best way to adapt LS1, LS2 and Ford 5.0L-based throttle bodies to EFI manifolds with traditional square-bore...

The Pro-Flo XT Chrysler 440 #7144 EFI intake manifold is engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range 1500-7000 rpm. Features include a 90mm throttle bore opening. This manifold produced 20...

Edelbrock part #7139 Pro-Flo XT LS1 EFI intake manifold is engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). Features a 90mm throttle bore opening and 2.75" port exit height. This...

Edelbrock part #71393 Pro-Flo XT LS1 EFI intake manifold is engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). Features a 90mm throttle bore opening and 2.75" port exit height. This...

The Edelbrock #38783 Victor EFI 4-Barrel Throttle Body complements our Victor EFI line of manifolds. This throttle body mounts on a standard 4150-style square-bore carburetor bolt spacing. It is sand cast, fully machined, and assembled by Edelbrock. The #38783 has 1.75" Throttle Bores and...

The Edelbrock 38353 adapter kit is required to install our Performer 5.0 PN 3821 or Performer RPM PN 7126 in 1994 and 1995 Mustangs. The 1994-1995 throttle body has a different bolt flange and idle air motor than 1987-1993 models. It is also swung...

Constructed from billet aluminum, the new Edelbrock 90mm Victor Series Pro-Flo XT(TM) Throttle Body, complete with TPS and IAC, maximizes performance upgrades on all Pro-Flo XT, EFI Victor Elbow, and Gen III and Gen IV engines with cable-driven throttle bodies. With bolt patterns for...

The Edelbrock 90mm single bore throttle body is intended for Pro-Flo XT and EFI Victor Elbow applications. It has provisions for either LS1 or LS2 mounting bolt patterns. The throttle body uses LS1 style TPS and IAC. It offers better idle control than other...

Edelbrock part #4204 Elite Series Short "Push-In" Breather is a die cast breather that will fit all existing Elite Series valve covers. The "push-in" mounting style is ideal for low-profile and center bolt Elite Series valve covers because they do not have internal clearance...

Edelbrock part #4202 Elite Series Tall Breather is a top mount bolt on design which uses both the existing valve cover breather hole and two bolts for secure mounting. The lid is removable for oil fills, and the lower housing contains a reticulated foam...

Edelbrock part #4201 Elite Series Breather is a side mount bolt on design. The lid is removable for oil fills, and the lower housing contains a reticulated foam element to allow gases through while trapping oil. Ideal for Elite or Elite II valve covers.

Edelbrock part #7281 Exhaust Gaskets are designed for 1961-79 Pontiac 326-389-400-421-428-455 V8 engines. These Exhaust Gaskets are made of EnCore HTX-900; a high-density non-asbestos fiber/metal core composite material consisting of two graphite coated, heat resistant fiber blended sheets that are mechanically and chemically fused...

The Edelbrock #93663 Exhaust Valve is a 1.76" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60669 & 60689 Cylinder Heads. Overall Length: 4.960". Set of 1 Valve

The Edelbrock #9717 Exhaust Valve Seat is a replacement for Edelbrock Big-Block Chevrolet Cylinder Heads with 1.88" Exhaust Valves. Set of 1This Part Fits: Year Make Model Submodel 1963,1965-1975 Chevrolet Bel Air Base 1963,1965-1972 Chevrolet Biscayne Base 1973-1974 Chevrolet Blazer Base 1969-1972 Chevrolet Brookwood...

The Edelbrock #9714 Exhaust Valve Seat is a Replacement for Edelbrock Pontiac Cylinder Heads with 1.66" Exhaust valves. Set of 1This Part Fits: Year Make Model Submodel 1980-1981 Buick Century Base 1979 Buick Century Custom 1980-1981 Buick Century Estate 1979-1981 Buick Century Limited 1979...

The Edelbrock #9719 Exhaust Valve Seat is a Replacement for Edelbrock Ford FE Cylinder Heads with 1.66" Exhaust Valves. Set of 1This Part Fits: Year Make Model Submodel 1958 Edsel Bermuda Base 1958 Edsel Citation Base 1958-1959 Edsel Corsair Base 1958 Edsel Pacer Base...

The Edelbrock #93664 Exhaust Valve is a 1.76" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60669 & 60689 Cylinder Heads. Overall Length: 4.960". Set of 8 Valves

Edelbrock part #7262 Exhaust Gaskets are designed for 1970-74 351 Cleveland V8 engines & 302 E-Boss, 351W E-Boss (Clevor) Conversions. These Exhaust Gaskets are made of EnCore HTX-900; a high-density non-asbestos fiber/metal core composite material consisting of two graphite coated, heat resistant fiber blended...

Edelbrock part #7328 head gasket is intended for Ford 351 Cleveland engines. This gasket comes as a set and has a 4.080" bore size, .038" compressed thickness and 8.1 cc volume.This Part Fits: Year Make Model Submodel 1978-1981 Ford Bronco Custom 1978 Ford Bronco...

The Edelbrock?#7374?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with Edelbrock...

Edelbrock part #7265 Intake Gaskets for 302 E-Boss & 351W E-Boss (Clevor) Conversions allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The...

Edelbrock part #7581 RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that's been used on our Victor Series competition intakes for decades. The Air-Gap design features...

Edelbrock part #7585 RPM Air-Gap Dual-Quad 351W intake manifold is designed for 351W small-block Fords. This intake offers performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a...

The Edelbrock #8566 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate the need for valve train removal...

Edelbrock part #2928 Super Victor 8.2 intake manifold is designed for high-rpm and competition 302-347 engines with aftermarket Windsor-style racing cylinder heads such as the Edelbrock Victor heads #77219 or Victor Jr. heads #77169. The Super Victor 8.2 is for engines with a standard...

Edelbrock part #2924 Super Victor 351W intake manifold is designed for high rpm or large displacement competition 351 Windsor Ford V8's with a deck height of 9.5" which are used in drag racing or oval track engines operating between 4500 and 8500 rpm. This...

Edelbrock part #7229 Exhaust Gaskets are designed for 1958-76 Ford 390-428 FE V8 engines. These Exhaust Gaskets are made of EnCore HTX-900; a high-density non-asbestos fiber/metal core composite material consisting of two graphite coated, heat resistant fiber blended sheets that are mechanically and chemically...

Edelbrock part #7224 Intake Gaskets for 1985-1976 390-428 FE Fords allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Micropore...

The Edelbrock #8557 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate the need for valve train removal...

The Edelbrock valve cover gaskets #7568 provide excellent sealing integrity and conformability for easy installation. The multi-layer construction has two highly compressible, high rubber content, fiber-reinforced outside layers which are chemically bonded to a high strength composite core. This unique core-reinforced construction has a...

Edelbrock part #2936 Victor FE intake manifold is designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines. This single-plane design provides race-winning power for many types of competition. Carb flange height is equal to the Ford high-riser manifold #C4AE-9424-G to fit under 427 Cobra...

Edelbrock part #1107 Ford Flathead 4-barrel intake manifold for 1949-53 engines. This intake manifold allows the use of square-bore carbs such as the Edelbrock Performer Series or Thunder Series AVS 500. This is a reproduction of the vintage Edelbrock #452 two-piece manifold with a...

The Edelbrock 77319 Small Block Ford Glidden-Victor II Pro-Port Cylinder head is designed specifically for the professional cylinder head porter and engine builder. Like the other Edelbrock Cylinder head, The Pro-Port cylinder head is also cast in the USA at the state-of-the-art Edelbrock Foundry...

Edelbrock introduces the all-new XTS(TM) Manifold for the Ford 7.3-liter Godzilla Engine. This manifold features shorter-than-stock tapered runners tuned for high-RPM gains in engine swap applications. Finished in a highly attractive black powder-coat finish, the XTS is designed of lightweight, durable sheet metal. The...

Edelbrock part #7123 Performer 5.0 RPM II intake manifold for 1986-95 5.0L Mustang engines has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for street and strip applications. This manifold consists of a...

Edelbrock part #29285 Super Victor 8.2 EFI intake manifold is designed for high-rpm and competition 302-347 engines with aftermarket Windsor-style racing cylinder heads such as the Edelbrock Victor heads #77219 or Victor Jr. heads #77169. The Super Victor 8.2 is for engines with a...

Edelbrock part #29245 Super Victor 351W EFI intake manifold is designed for high rpm or large displacement competition 351 Windsor Ford V8's with a deck height of 9.5". It's ideal for drag racing or oval track engines operating between 4500 and 8500 rpm. This...

Edelbrock part #6989 replacement top gasket for Edelbrock #7115 & 7075 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets...

Edelbrock part #6999 replacement base to top gasket for Edelbrock #7110 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets...

Edelbrock part #6950 replacement top to base gasket for Edelbrock #7110 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets...

Edelbrock part #7355 replacement base to top gasket for Edelbrock #7085, #7086 & #70855 Victor Ram intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other...

Edelbrock part #7348 head gasket is intended for 1987-06 Jeep with 4.0L Inline 6. This gasket comes as a set and has a 4.005" bore size, .042" compressed thickness and 8.88cc volume.This Part Fits: Year Make Model Submodel 1987-1993 Jeep Cherokee Base 1991-1992 Jeep...

Edelbrock part #6942 replacement top gasket for Edelbrock #3785 & #3789 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets...

Edelbrock part #6988 replacement top gasket for Edelbrock #7070 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets ensure a...

Edelbrock part #8700 is a replacement gasket used with P/N 1103 - Ford/Mercury Flathead V8 Slingshot Manifold. It is located between the manifold and carburetor adaptor. Top quality Edelbrock gaskets ensure a perfect seal every time.This Part Fits: Year Make Model Submodel 1938-1940,1942-1947 Ford...

Edelbrock part #7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275" bore size, .045" compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though...

Edelbrock #7327 is a Cylinder Head Gasket Set for 1992+ Small-Block Chrysler/Dodge Magnum V8 Engines. The Gasket has a 4.140" Bore Size, .048" Compressed Thickness and 10.70 cc Volume.This Part Fits: Year Make Model Submodel 1992-1994 Dodge B150 Base 1995-1998 Dodge B1500 Base 1992-1994...

Edelbrock part #7341 head gasket is intended for Ford 302 E-Boss and 351w E-Boss (Clevor) conversions using Edelbrock #61699 heads. This gasket comes as a set and has a 4.100" bore size, .041" compressed thickness and 9.2 cc volume.This Part Fits: Year Make Model...

Edelbrock part #15043 intake manifold gaskets for 1994-01 Acura Integra LS B18B are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets ensure...

Edelbrock part #15042 intake manifold gaskets for 1994-01 Acura Integra GSR B18C1 are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets ensure...