Engine

The Edelbrock #9360 Intake Valve is a 2.30" 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Fits Edelbrock #61409 & #77409 Cylinder Heads. Overall Length: 5.625". Set of 1 Valve

The Edelbrock #97040 Intake Valves is a 2.25" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut 11/32" stem. Fits Edelbrock #61459, #61559 & #61555 Cylinder Heads. Overall Length: 5.350" Set of 1 Valves

The Edelbrock #93770 Intake Valve is a 2.19" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock 60679, 60699, 61669 & 61649 Cylinder Heads. Overall Length: 5.265". Set of 1 Val

The Edelbrock #9370 Intake Valve is a 2.05" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock 77169, 77179, 77189, 77199 & 77359 Heads. Overall Length: 5.060". Set of 1 Valve

The Edelbrock #9771 Exhaust Valve is a 1.88" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60459, #60479, #60499, #60559 & #60439 Cylinder Heads OAL: 5.450" Set of 1

The Edelbrock #9770 Intake Valve is a 2.19" 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Fits Edelbrock #60459, #60479, #60499 & #60559 Heads. Overall Length: 5.314" Set of 1 Valve

The Edelbrock #9772 Exhaust Valve is a 1.55" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60797 Cylinder Heads Overall Length: 4.930" Set of 1 Valve

The Edelbrock #9774 Intake Valve is a 1.94" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60979 Cylinder Heads. Overall Length: 4.910" Set of 1 Valve

Edelbrock #9643 Exhaust Valve is a 1.81" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #60929 & #60189 Cylinder Heads Overall Length: 4.928". Set of 1 Valve

The Edelbrock #9778 Intake Valve is a 2.02" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60399 Cylinder Heads. Overall Length: 5.090" Set of 1 Valve

The Edelbrock #9764 Intake Valve is a 1.90" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60229 & #60329 Cylinder Heads. Overall Length: 4.910" Set of 1 Valve

Edelbrock #9766 Exhaust Valve is a 1.60" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits 60229, 60259, 60329, 60359, 60989, AMC, SB Chevy Cylinder Heads OAL: 4.930" Set of 1 Valve

The Edelbrock #9760 Intake Valve is 2.02" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock 60989, AMC, S/B Chevy & Ford Cylinder Heads. Overall Length: 4.910".Set of 1 Valve

Edelbrock #9767 Exhaust Valve is a 1.60" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #60379 & #60399 Cylinder Heads Overall Length: 5.110" Set of 1 Valve

The Edelbrock #9763 Intake Valve is a 1.90" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60379 Cylinder Heads. Overall Length: 5.090 Set of 1 Valve

Edelbrock #9756 Exhaust Valve is a 1.66" 1-piece, swirl-polished, hardened tip stainless steel valve with 3/8" undercut stems for increased flow. Fits 60069 & 60079 Cylinder Heads OAL: 5.450" Set of 1 Valve

The Edelbrock #9754 Intake Valves is a 2.09" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut 3/8" Valve Stems for increased flow. Fits Edelbrock #60069 & 60079 Cylinder Heads. Overall Length: 5.450". Set of 1 Valve

The Edelbrock #9640 Intake Valve is a 2.14" 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Fits Edelbrock #60929 & #60189 Cylinder Heads. Overall Length: 4.908". Set of 1 Valve

The Edelbrock #9750 Intake Valve is a 2.11" 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Fits Edelbrock #60599 Cylinder Heads. Overall Length: 5.213" Set of 1 Valve

The Edelbrock #9783 Exhaust Valve is a 1.66" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60579, #61579 & #61599 Cylinder Heads Overall Length: 5.110" Set of 1 Valve

The Edelbrock #9781 Intake Valve is a 2.11" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60579, #61579 & #61599 Cylinder Heads. Overall Length: 5.093" Set of 1 Valve

Edelbrock #9752 Exhaust Valve is a 1.66" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #60599 Cylinder Heads. +.120" Longer than Stock. Overall Length: 5.230". Set of 1 Valve

The Edelbrock #9786 Exhaust Valve is a 1.60" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #77619, #77629, #77639 & #77649 Cylinder Heads Overall Length: 5.020" Set of 1

The Edelbrock #9784 Intake Valve is a 2.08" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #77619, #77629, #77639 & #77649 Heads. Overall Length: 5.010" Set of 1 Valve

Edelbrock part #72018 Bulk Pack Intake Gaskets for 1958-1986 Small-Block Chevy allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N...

Edelbrock part #72208 Bulk Pack Intake Gaskets for 1963-1996 Small-Block Fords allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N...

Larger-than-stock throttle bodies deliver increased performance by allowing more air to enter the engine. The Edelbrock 103mm Throttle Body #38988 features analog electronics and is designed for use with the 2015-17 Ford Mustang Modular Inlet Supercharger. This throttle body is also required when purchasing...

The Edelbrock #5085 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised exhaust ports and larger diameter...

The Edelbrock #5027 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised exhaust ports and larger diameter springs for higher...

The Edelbrock #5028 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised exhaust ports and larger diameter springs for higher...

Edelbrock part #2071 Performer RPM Top End Kit is designed for 2008 & Later LS3 engines. This Top End Kit produced 505 HP & 471 TQ on a 6.2L LS3 engine. The kit delivers improved performance in street applications from 1,500 to 6,500 rpm...

Edelbrock Part #7521 RPM Air-Gap intake manifold is designed for the small-block 302 CID Ford V8 or 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that?s been used on our Victor Series competition intakes and is the perfect manifold for hot...

The Edelbrock Victor Jr. 2V Sportsman #6940 is a replacement carburetor base gasket for Edelbrock #2901, 2912 and 2940 intake manifolds.

Edelbrock part #7232 replacement base and upper plenum gasket for #2945 & 3887 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality...

Edelbrock part #2992 Victor 18 Degree Spider base is the bedding plate portion of a two-piece (valley plate and spider) manifold system. This Spider base is intended for use with "Conventional" 18-degree SBC heads on a standard deck engine block. This plate is more...

Edelbrock part #7576 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. This RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. The Air-Gap design...

Edelbrock Rollin' Thunder Camshaft #2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily...

Edelbrock part #3882 Performer RPM 5.8L Upper Plenum Only (includes plenum cover) is designed for 1988-96 Ford 5.8L, EFI, truck engines. The modular design of this intake manifold incorporates the latest air flow technology for maximum torque gains in the mid-range. This Upper Plenum...

Edelbrock part #7564 RPM Air-Gap 351C intake manifold design utilizes the same race-winning technology that's been used on Edelbrock's Victor Series competition intakes for many decades. Designed to improve performance on the street or racetrack, this manifold features an open space that separates the...

Edelbrock part #3832 replacement base and plenum cover gaskets for Edelbrock #3821 intake manifold are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock...

Edelbrock part #3833 replacement base and plenum cover gaskets for Edelbrock #3841 & #3881 intake manifolds are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top...

The Edelbrock #7382?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with...

Edelbrock part #29365 Victor FE EFI intake manifold is designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines. The single-plane design provides race-winning power for many types of competition. Carb flange height is equal to the Ford high-riser manifold #C4AE-9424-G to fit under 427...

Edelbrock part #2098 Performer RPM Top End Kit is designed for 1957-86 Small-Block Chevy 350 V-8 engines. This Top End Kit produced 410 HP & 408 TQ on a 350 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from...

Edelbrock part #2099 Performer RPM Top End Kit is designed for 1957-86 Small-Block Chevy 327-350 V-8 engines. This Top End Kit produced 435 HP & 435 TQ on a 350 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from...

Edelbrock part #2097 Performer RPM Top End Kit is designed for 1987 & later Small-Block Chevy 383 V-8 engines. This Top End Kit produced 435 HP & 435 TQ on a 350 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street...

Edelbrock part #3841 Performer Truck 5.0 EFI intake manifold fits 1987-96 Ford 5.0L EFI V8 truck engines. The modular design incorporates the latest air flow technology for maximum torque gains in the mid-range where trucks need it most. The upper and plenum cover are...

Edelbrock part #3884 Performer 5.8L EFI intake manifold base is designed for 1988-96 Ford 5.8L, EFI, truck engines. This intake manifold base manifold is CNC port matched to upper manifold for maximum performance.This Part Fits: Year Make Model Submodel 1988-1992 Ford F-150 Custom 1995-1996...

Edelbrock part #3881 Performer 5.8L EFI intake manifold is designed for 1988-96 Ford 5.8L, EFI, truck engines, the modular design of this manifold incorporates the latest air flow technology for maximum torque gains in the mid-range. This manifold made 34 ft-lbs. more torque than...

Edelbrock part #2701-BP Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. Edelbrock's Patented dual-plane, low-rise design with a 180-degree firing order greatly improves torque...