Exhaust, Mufflers & Tips

EXCEPT ZR2 & AT4X models. This extension pipe is used to adapt the BORLA® 147.4" Wheelbase Cat-Back™ systems to fit Crew Cab with Standard Bed (6' 7") 157" Wheelbase vehicles. The extension pipe dimensions are 3.5" ID inlet, 3.5" OD outlet, 12" long. Includes...

This X-Pipe with Mid-Pipes has been developed specifically for the Mustang GT. It is used to connect to Borla(r) Axle-Back systems creating a full Cat-Back(tm) system with a 2.5" pipe diameter to increase power and performance. This part is only to be used with...

Does NOT fit Original Equipment (O.E.) or other exhaust systems. Gladiator owners can use this tip assembly to convert the BORLA® High Clearance Climber / Rock Crawler system to a dual outlet side exit system. This is the 2.75" ID inlet with dual 3.5"...

Does NOT fit Original Equipment (O.E.) or other exhaust systems. Gladiator owners can use this tip assembly to convert the BORLA® High Clearance Climber / Rock Crawler system to a dual outlet side exit system. This is the 2.75" ID inlet with dual 3.5"...

Does NOT fit Original Equipment (O.E.) or other exhaust systems. Gladiator owners can use this 2.75" turn down tip to convert the BORLA® dual outlet side exit system to a High Clearance Climber / Rock Crawler system. Providing additional clearance a Climber / Rock...

Borla(r) presents our high clearance Y-Pipe for the Toyota Tacoma 3.5L V6. Our Y-Pipe removes the Y-Pipe from under the transfer case and reroutes it around the transfer case. This provides increased ground clearance and gives your Tacoma better off-roading capability. The cut and...

Installation REQUIRES cutting the Original Equipment system. The Loop Delete Pipe provides more space underneath your Wrangler JL/ JLU or Gladiator JT. Built from 2" diameter premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best...

For those of you who purchased a BORLA® S-Type system, PN 140791 or 140791BC and want to step it up to the ATAK® sound, replace the front mufflers with this set of 2.75" diameter ATAK® mufflers. Each muffler is built from premium T-304 stainless...

If you have a BORLA® ATAK® system, PN 140792, or 140792BC and want to turn down the volume a bit to the S-Type sound, replace the front mufflers with this set of 2.75" diameter S-Type mufflers. Each muffler is built from premium T-304 stainless...

Extension pipe 60693 is used to adapt select BORLA® Cat-Back™ systems to trucks with a Crew Cab with Standard Bed (8') 176" Wheelbase. EXCEPT vehicles with dual rear wheels. 3.5" ID Inlet, 3.5" OD Outlet, 36.5" Long. Includes 1) 3.5" clamp. Built from premium...

Extension pipe 60692 is used to adapt select BORLA® Cat-Back™ systems to trucks with an Extended Cab with Standard Bed (8') 164" Wheelbase. EXCEPT vehicles with dual rear wheels. 3.5" ID Inlet, 3.5" OD Outlet, 24.5" Long. Includes 1) 3.5" clamp. Built from premium...

EXCEPT Vehicles With Dual Rear Wheels. Extension pipe 60691 is used to adapt select Borla® Cat-Back™ systems to trucks with an Extended Cab with Short Bed (6' 9") 148" Wheelbase. 3.5" ID Inlet, 3.5" OD Outlet, 8.5" Long. Includes 1) 3.5" clamp. Built from...

This 2" Mid-Pipe is used to connect the Borla(r) Axle-Back system PN 11961 to the factory catalytic converter creating a 2"diameter S-Type Cat-Back(tm) system. Built from premium T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute...

Replace the Polyphonic Harmonizer behind the primary muffler in the BORLA® ATAK® system with muffler 60679 to attain the S-Type sound level (quieter than ATAK®). Built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute...

Use this muffler/ resonator to change the sound of your Borla(r) Cat-Back(tm) 140755 from an S-Type sound level to an ATAK(r) sound level. Use ONLY with Borla(r) system. It does NOT fit competitor or Original Equipment Systems. 3" diameter inlet and outlet. Built from...

Use this muffler/ resonator to change the sound of your Borla(r) Cat-Back(tm) system 140756 from an ATAK(r) sound level to an S-Type sound level. Use ONLY with Borla(r) systems. It does NOT fit competitors, or Original Equipment systems. 3" diameter inlet and outlet. Built...

This tip kit contains 2) tip assemblies with a total of 4) outlets. These single 3" Inside Diameter (I.D.) Inlet with dual 4" Outside Diameter (O.D.) round carbon fiber tips with bright center outlet tips are the perfect way to customize the appearance of...

This tip kit contains 2) tip assemblies with a total of 4) outlets. These single 3" Inside Diameter (I.D.) Inlet with dual 4" round Outside Diameter (O.D.) Outlets black chrome on T-304 stainless steel outlets tips are the perfect way to customize the appearance...

(NO 2025 model with 5.7L). This resonator is designed to dampen the sound of select BORLA® Cat-Back™ systems. It is NOT designed to work with competitors or Original Equipment (O.E.) systems. Installation REQUIRES that the small front muffler in the O.E. system is cut...

This optional resonator is used when additional sound reduction is desired. 3" diameter inlet and outlet. It is designed to be used with the Borla(r) Cat-Back(tm) systems 140750, 140750BC, 140750SB, 140751, 140751BC, 140751SB, 140741SB. Adding this resonator to these systems will achieve the Touring...

This BORLA® SwitchFire® X-Pipe assembly is designed to replace the Original Equipment (O.E.) resonator ONLY. Installation REQUIRES cutting the Original Equipment (O.E.) exhaust. Install it by itself, or combine with other BORLA® parts. Part is 33.2" Long x 7.1" Wide x 5.5" High. Inlets...

NOT recommended for use on convertibles. This Resonator is designed to replace the Merge X-Pipe in select BORLA® Cat-Back systems to dampen the sound. Use ONLY with BORLA® systems. It is NOT designed to work with competitors or Original Equipment (O.E.) systems. The resonator...

Use this Resonator to REPLACE the Merge X-Pipe in Borla(r)Mid-Section 60637 or 60638 and provide additional sound attenuation. Built from premium T-304 stainless steel, superior to T-400 series (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends...

These 3" diameter tail pipes are designed to work with either BORLA® 60637, 60638, 60731, or 60732 mid-sections / muffler assemblies, or the Original Equipment (O.E.) mid-section / muffler assembly. They feature single 4.5" round carbon fiber tips with black anodized centers on each...

These BORLA® 3" diameter tail pipes are designed to work with either BORLA® 60637, 60638, 60731, or 60732 mid-sections / muffler assemblies, or the Original Equipment (O.E.) mid-section / muffler assembly. They feature single 4.5" round black chrome on T-304 stainless steel tips on...

These BORLA® 3" diameter tail pipes are designed to work with either BORLA® 60637, 60638, 60731, or 60732 mid-sections / muffler assemblies, or the Original Equipment (O.E.) mid-section / muffler assembly. They feature single 4.5" round bright chrome on T-304 stainless steel tips on...

Borla(r) system is a True Dual design. This Mid-Section includes a merge X-Pipe and ATAK(r) mufflers for increased performance and our distinctive Borla(r) sound. X-Pipes unleash hidden horsepower. It fits with either the O.E. tailpipes or Borla(r) tailpipes. Built from premium T-304 stainless steel,...

Borla(r) system is a True Dual design. This Mid-Section includes a merge X-Pipe and S-Type mufflers for increased performance and our distinctive Borla(r) sound. X-Pipes unleash hidden horsepower. It fits with either the O.E. tailpipes or Borla(r) tailpipes. Built from premium T-304 stainless steel,...

These resonators are used to convert a 140632 S-Type system into an ATAK(r) system. Use ONLY with Borla(r) system. It does NOT fit competitors or Original Equipment systems. 2.75" diameter part. Built from premium T-304 stainless steel, superior to T-400 series (such as 409),...

These resonators are used to convert a 140633 ATAK(r) system into a S-Type system. Use ONLY with Borla(r) systems. It does NOT fit with competitor or Original Equipment systems. 2.75" diameter system. Built from premium T-304 stainless steel, superior to T-400 series (such as...

Create your own custom systems using BORLA® Hot Rod Builder Kits. All components in this kit are 2.5" Outside Diameter (O.D.) T-304 stainless steel which will never rust. Elbows, and u-bends are mandrel bent for maximum flow. Kit contains (4) 45° elbows, (4) 90°...

3" diameter into 2.25" reverse Y-pipe. Adding this Mid-Pipe with Y-Pipe to an Axle-Back system will give you all the elements of a Cat-Back(tm) system. These Mid-Pipes are NOT intended for use with OE factory mufflers. Built from premium T-304 stainless steel, superior to...

This 2.75" diameter X-Pipe with Mid-Pipes is designed for use with Borla(r) Axle-Back systems ONLY. The system contains a Merge X-Pipe to unleash hidden horsepower and create a custom sound. The system includes AFM valves. Built from premium, high-quality T-304 austenitic stainless steel, superior...

Does NOT fit competitors or Original Equipment systems. This resonator with 2.75' diameter inlet and outlet can be used to replace the Borla(r) Mid-Pipes in X-Pipe with Mid-Pipe assemblies 60607 or 60610 for additional sound control. The resonator is used to attain the "Touring"...

This 2.75" diameter X-Pipe With Mid-Pipes is for use with Borla(r) Axle-Back systems ONLY. When combined with an Axle-Back system it creates a Cat-Back(tm) System. The 60607 contains a Merge X-Pipe to unleash hidden horsepower and create a custom sound. The 60607 ELIMINATES the...

The 60595 dual 2" inlet, single 2.5" diameter outlet Loop Delete Y-Pipe provides more space underneath your Wrangler JK/ JKU. Installation REQUIRES cutting the Original Equipment system. Built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you...

This extension pipe is used to fit the 140680 & 140680BC systems to the longer Wheelbase 140.6" Double (Crew) Cab with Long Bed (6' 1") models. Includes 1) 2.5" clamp. Built from premium austenitic T-304 stainless steel, superior to T-400 series knockoffs (such as...

Create your own custom systems using BORLA® Hot Rod Builder Kits. All components in this kit are 3" Outside Diameter (O.D.) T-304 stainless steel which will never rust. Elbows, and u-bends are mandrel bent for maximum flow. Kit contains (4) 45° elbows, (4) 90°...

Bolts on to end plate on CrateMufflers. Kit contains 2) T-304 stainless steel brackets, 4) speed nuts, 4) bolts, and 4) washers. Natural mill finish can be brushed or polished prior to installation. To see how to use these hangers check out the "How...

Use this extension pipe with Cat-Back(tm) systems 140645 and 140645BC on Crew Cab With Long Bed (6' 2") 140.5" Wheelbase (140.5") Colorado/ Canyon vehicles. Includes 1) 2.75" clamp. Built from premium T-304 stainless steel, superior to T-400 series (such as 409), to give you...

The BORLA® sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA® exhaust note has become...

This Muffler / Resonator is designed to replace the Merge X-Pipe in select BORLA® Cat-Back™ systems to dampen the sound. It is NOT designed to work with competitors or Original Equipment (O.E.) systems. The resonator contains an internal H-Pipe for increased performance and improved...

The BORLA® sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA® exhaust note has become...

This 3" diameter extension pipe is used to adapt Crew Cab with Short Bed (5' 7") 144.5" wheelbase Cat-Back™ systems (140415, 140416, 140416BC and 140417) to Crew Cab with Standard Bed (6' 7") 156.5" wheelbase vehicles. Includes 1) 3" clamp. Built from premium T-304...

Installation REQUIRES cutting the Original Equipment (O.E.) exhaust system. Cut and clamp behind the secondary catalytic converters. Fits vehicles with or without AFM valves and / or NPP valves (dual mode exhaust). The BORLA® 60548 X- Pipe works perfectly between the factory catalytic converters...

These 2.75" diameter Over Axle Mid-Pipes are recommended to be used with the Borla(r) Axle-Back system and X-Pipe to complete a Cat-Back(tm) system. Built from premium T-304 stainless steel, superior to T-400 series (such as 409), to give you the absolute best in performance...

This 2.75" diameter performance Merge X-Pipe is designed to unleash power while adding a great sound. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla(r) Sound of Power respected by motoring enthusiasts everywhere. Built from premium T-304 stainless steel, superior...

For those who have purchased our Axle-Back system or GM Performance rear mufflers and are looking to upgrade with a 2.5" diameter Merge X-Pipe with Mid-Pipes, here you go. X-Pipes unleash horsepower and create a custom sound. This is essentially the front portion of...

This 2.5" diameter performance Merge X-Pipe with Mid-Pipes creates power while adding a great sound. They will fit vehicles with and WITHOUT NPP. Borla(r) Cat-Back(tm) / Axle-Back systems used with this part do NOT include NPP valves. Borla(r) Performance Industries once again proves why...

This 2.5" diameter performance X-Pipe with Mid-Pipes creates power while adding a great sound to the C5 / C5 Z06 Corvette systems. In testing, customers and racers alike noticed the power increase you've come to expect from BORLA(r), and all commented on the great...