Fabrication

Set of brackets to retain fuel lines and brake lines on underside of Nissan vehicles including S13, S14, R32, R33, R34 and more. Billet aluminum, with hardware.

Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.

Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.

Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.

Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an accident. Aluminum construction. Black anodized color.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Universal in-line check valve. Female 8AN ORB inlet, male 10AN flare outlet. Compatible with all fluids.

Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.

Pack of 15 aluminum acorn nuts. 10-32 thread. Non conductive. For use with Radium electrical studs.

Radium Engineering 12AN Female Fitting to Air Filter

For use with the Radium Engineeing Evo X fuel pump hanger. This small part plugs the hole for the fuel tank pressure sensor. In some parts of the world, the Evo X was not equipped with this sensor. So this part provides a way...

CNC machined aluminum. For 0.39 diameter tube. M6 screw included.

CNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits: Year Make Model Submodel 1993-1998 Toyota Supra Base 1993-1998 Toyota Supra Twin Turbo

CNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits: Year Make Model Submodel 1993-1998 Toyota Supra Base 1993-1998 Toyota Supra Twin Turbo

Radium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long

Line and fittings for remote mounting a pressure gauge or pressure transducer. 1/8NPT compatible. Gauge sold separately.

Radium Engineering Submersible PTFE Fuel Tubing 5/16in x 6.5in Long

Radium Engineering 3/8in SAE Female to 6AN Male Low Profile Fitting

Radium Engineering 5/16in SAE Female to 6AN Male Low Profile

Radium Engineering Fuel Cell Weld Flange 24-Bolt Aluminum

Replaces OEM fuel feed tube on the firewall to the engineThis Part Fits: Year Make Model Submodel 2015-2017 Subaru WRX Base 2015-2017 Subaru WRX Limited 2015-2017 Subaru WRX Premium

Radium Engineering 8AN Dry Break 27mm Fitting

Radium Engineering 3 Into 1 Distribution Block w/ Fittings

Radium Engineering Hose Separator Clamp - 5 Way

Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo

Fuel pulse damper that can be used in-line with a fuel hose. Comes with adapter for 5/16 hose-barb connections

Fuel pulse damper that can be used in-line with a fuel hose. Comes with adapter for 5/16 hose-barb connections

Radium Engineering 5/8in Barb to 10AN FST Fitting

Radium Engineering Submersible PTFE Fuel Tubing 3/8in 12.8in Long

INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM

Radium Engineering Submersible PTFE Fuel Tubing 5/16in x 12.8in Long

Requires a 9/16-18 threaded hole with chamfer to be drilled into the mating part for sealing. Barb is 8.5mm

Radium Engineering Fuel Surge Tank 6AN Bulkhead Plate w/ Fittings and Nuts

Radium Engineering 2-Piece Fuel Pump Clamp For Bosch 044 - Green W/ Logo

Radium Engineering 0-100 PSI Fuel Pressure Gauge w/ 8AN Adapter

high strength double-layed cotton filtration element

Radium Engineering EFI Hose Clamp - 10.5mm To 12mm

Radium Spring Clamp 3/4in Hose

Radium Spring Clamp 5/8in Hose

Radium Engineering Spring Clamp 1/2in Hose

Radium Spring Clamp 5/16in Hose

Radium Engineering Spring Clamp 1/4 Hose

Radium Engineering EFI Hose Clamp - 12.5mm to 14mm

Reduces fuel slosh noise and prevents fuel back flow

Radium Engineering Electrical Bulkhead Stud Kit (Pack of 6)

Radium Engineering 5/16in SAE Female Deep to 5/16in Barb

Radium Engineering 10AN Hose End 90 Degree PTFE - BLACK

Radium Engineering 10AN Hose End 45 Degree PTFE - BLACK