Edelbrock
-
Edelbrock O-Rings Intake Manifold Gasket LS1/2 Pack of 8Vendor: EdelbrockEdelbrock part #7386 1997-Later LS1 intake manifold O-ring gaskets are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets ensure a perfect seal...
- Dhs. 335.78 AED
- Dhs. 335.78 AED
- Unit price
- per
-
Edelbrock Oldsmobile big-block E-Series Cylinder Head Bolt KitVendor: EdelbrockEdelbrock E-Series Cylinder Head Bolt Kit #85582 is a high-quality replacement bolt set for big-block Oldsmobile engines equipped with Edelbrock Performer RPM cylinder heads. This bolt kit is required when installing Edelbrock heads on an engine previously equipped with cast iron heads. With Edelbrock...
- Dhs. 398.06 AED
- Dhs. 398.06 AED
- Unit price
- per
-
Edelbrock Oxygen Sensor 4-Wire SwitchingVendor: EdelbrockThe Edelbrock #36013 is a Replacement Bosch 4-wire switching, Narrow-Band Oxygen Sensor for ProFlo2, ProFlo2/XT, and Pro-Tuner EFI Systems.
- Dhs. 468.68 AED
- Dhs. 468.68 AED
- Unit price
- per
-
Edelbrock Perf 289 w/ O EGR Polished ManifoldVendor: EdelbrockEdelbrock part #21211 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8's. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more...
- Dhs. 1,962.55 AED
- Dhs. 1,962.55 AED
- Unit price
- per
-
Edelbrock Perf EGR Manifold 87-95Vendor: EdelbrockEdelbrock part #3706 Performer EGR intake manifold is designed for street 262-400 c.i.d. Chevy V8's that have heads with canted center bolt holes, 1987-1995. This intake manifold accepts late-model water neck, air-conditioning, alternator, H.E.I. and have rear water crossovers. For 1987-95 stock aluminum heads...
- Dhs. 1,328.93 AED
- Dhs. 1,328.93 AED
- Unit price
- per
-
Edelbrock Perf Manifold 350 Olds EGRVendor: EdelbrockEdelbrock part #3711 Performer Oldsmobile 350 EGR intake manifold is designed for street 307-330-350-403 c.i.d. Oldsmobile V8's, 1964-85. Will fit 1980-1/2 to 1985 307 c.i.d. V8's with 5A heads (casting #3317). This intake manifold comes with a universal pad to fit most carburetors with...
- Dhs. 1,597.06 AED
- Dhs. 1,597.06 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit AMC 290-401Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2132 is a smooth idling...
- Dhs. 1,259.01 AED
- Dhs. 1,259.01 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Buick V-6 231-252 Even FireVendor: EdelbrockEdelbrock part #5487 Performer-Plus camshaft is designed for Buick 321-252 Even Fire V-6 applications. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a...
- Dhs. 1,308.95 AED
- Dhs. 1,308.95 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Chev 283-400Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2102 is designed for 265-400 Chevy V8 engines from 1957-86 and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2102 is a...
- Dhs. 1,037.26 AED
- Dhs. 1,037.26 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Chev 305-350 Tbi and Lg-4Vendor: EdelbrockEdelbrock part #3702 Performer-Plus camshaft is designed for small-block Chevy 305-350 T.B.I & LG-4 V-8 applications. This Edelbrock cam kit produced 245 ft-lbs. of torque when used with #3701 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum...
- Dhs. 1,099.07 AED
- Dhs. 1,099.07 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Chev V-6 2 8Vendor: EdelbrockEdelbrock part #3790 Performer-Plus camshaft is designed for Chevy 2.8L 60 degree V-6 applications. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a...
- Dhs. 1,018.75 AED
- Dhs. 1,018.75 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Chev V-6 200-229Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2112 is designed for 200-229 Chevy 90 Degree V6 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2112 is a...
- Dhs. 1,101.82 AED
- Dhs. 1,101.82 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Chrys 318-360Vendor: EdelbrockEdelbrock part #2177 Performer-Plus camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 305 ft-lbs. of torque when used with #2176 intake and stock iron cylinder heads on a 318 engine. The camshaft will produce optimum torque from the...
- Dhs. 1,273.18 AED
- Dhs. 1,273.18 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Chrys 383-440Vendor: EdelbrockEdelbrock part #2192 Performer-Plus camshaft is designed for 1968 and later big-block Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 427 ft-lbs. of torque when used with #2191 intake and stock iron cylinder heads on a 440 engine. The camshaft will produce optimum...
- Dhs. 1,493.13 AED
- Dhs. 1,493.13 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Ford 289-302Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2122 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2122 is a smooth idling...
- Dhs. 1,149.93 AED
- Dhs. 1,149.93 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Ford 351M-400Vendor: EdelbrockEdelbrock part #2172 Performer-Plus camshaft is designed for Ford 351M-400 V-8 applications. This Edelbrock cam kit produced 390 ft-lbs. of torque when used with #2171 intake and stock iron cylinder heads on a 400 engine. The camshaft will produce optimum torque from the low-end...
- Dhs. 1,232.60 AED
- Dhs. 1,232.60 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Ford 351WVendor: EdelbrockEdelbrock part #2182 Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with #2181 intake and stock iron cylinder heads on a 351W engine. The camshaft will produce optimum torque from the...
- Dhs. 1,212.07 AED
- Dhs. 1,212.07 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Ford 429-460Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2167 is designed for 429-460 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2167 is a smooth idling...
- Dhs. 1,311.89 AED
- Dhs. 1,311.89 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Ford FE 352-428Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2106 is designed for 352-428 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2106 is a smooth idling...
- Dhs. 1,327.54 AED
- Dhs. 1,327.54 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Olds 350-403Vendor: EdelbrockEdelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the...
- Dhs. 1,261.87 AED
- Dhs. 1,261.87 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2152 is designed for 400-425-455 Oldsmobile V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2152 is a smooth idling...
- Dhs. 1,281.52 AED
- Dhs. 1,281.52 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit Pontiac 350-455Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2157 is designed for 350-455 Pontiac V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2157 is a smooth idling...
- Dhs. 1,276.38 AED
- Dhs. 1,276.38 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit SBC 400Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2103 is designed for 400 Chevy V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2103 is a smooth idling...
- Dhs. 1,197.31 AED
- Dhs. 1,197.31 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam and Lifters Kit67and Later Chev 396-454Vendor: EdelbrockEdelbrock Performer-Plus Camshaft #2162 is designed for 396-427-454 Chevy V8 engines and produces optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2162 is a smooth idling...
- Dhs. 1,123.53 AED
- Dhs. 1,123.53 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam Only Chevy 4 3 Before 1992Vendor: EdelbrockEdelbrock Rollin' Thunder Camshaft #3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams...
- Dhs. 1,855.97 AED
- Dhs. 1,855.97 AED
- Unit price
- per
-
Edelbrock Perf Plus Cam Only Ford 5 0Vendor: EdelbrockEdelbrock Rollin' Thunder Camshaft #3722 is designed for 5.0L Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily...
- Dhs. 1,788.07 AED
- Dhs. 1,788.07 AED
- Unit price
- per
-
Edelbrock Perf RPM 302 Ford ManifoldVendor: EdelbrockEdelbrock part #7121 Performer RPM 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. No provisions for exhaust heated choke. Edelbrock carbs will work with Ford automatic overdrive...
- Dhs. 1,189.01 AED
- Dhs. 1,189.01 AED
- Unit price
- per
-
Edelbrock Perf RPM 330-403 ManifoldVendor: EdelbrockEdelbrock part #7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403 c.i.d. Oldsmobile's and 1980-1/2 to 1985 307 c.i.d. engines with 5A heads (casting #3317). This Oldsmobile manifold is a high-rise, dual-plane design with 180-degree firing order engineered for maximum top-end horsepower...
- Dhs. 1,583.80 AED
- Dhs. 1,583.80 AED
- Unit price
- per
-
Edelbrock Perf RPM 351-W Polished ManiVendor: EdelbrockEdelbrock part #71811 Performer RPM 351W intake manifold is designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock Performer RPM cylinder heads, modified OEM cylinder heads or equivalent. The dual-plane design offers good throttle response with excellent top-end power for...
- Dhs. 2,247.83 AED
- Dhs. 2,247.83 AED
- Unit price
- per
-
Edelbrock Perf RPM 440 Polished ManifoldVendor: EdelbrockEdelbrock part #71931 Performer RPM 440 intake manifold is designed for 413-426-440 c.i.d. Chrysler V8's. The dual-plane design results in excellent low-rpm torque and outstanding high-rpm hp. For high-performance'street/strip applications. This manifold offers a polished finish for a brilliant shine and classic look.This Part...
- Dhs. 2,140.52 AED
- Dhs. 2,140.52 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam And Lifter Kit for Ford 351CVendor: EdelbrockEdelbrock part #7168 Performer RPM Camshaft is designed for small-block Ford 351C V-8 applications. This Edelbrock cam kit produced 465 HP & 445Ft-lbs. of torque when used with #7564 intake and #61629 cylinder heads on a 351C. engine. The camshaft works well with high-performance's...
- Dhs. 1,485.78 AED
- Dhs. 1,485.78 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam and Lifters Kit Chev 283-400Vendor: EdelbrockEdelbrock part #7102 Performer RPM Camshaft is designed for 1957-1986 small-block Chevy 283-400 V-8 applications. This Edelbrock cam kit produced 410 HP & 408 ft-lbs. of torque when used with #7501 intake and #60899 cylinder heads on a 350 engine. The camshaft works well...
- Dhs. 1,303.15 AED
- Dhs. 1,303.15 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam and Lifters Kit Chrys 318-360Vendor: EdelbrockEdelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine. The camshaft works well with...
- Dhs. 1,696.55 AED
- Dhs. 1,696.55 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam and Lifters Kit Chrys 383-440Vendor: EdelbrockEdelbrock part #7194 Performer RPM Camshaft is designed for 1968 & Later Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 469 HP & 515 ft-lbs. of torque when used with #7193 intake and #60929 cylinder heads on a 440 engine. The camshaft works...
- Dhs. 1,723.54 AED
- Dhs. 1,723.54 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam and Lifters Kit Ford 289-302Vendor: EdelbrockEdelbrock part #7122 Performer RPM Camshaft is designed for small-block Ford 289-302 V-8 applications. This Edelbrock cam kit produced 367 HP & 340 ft-lbs. of torque when used with #7121 intake and #60259 cylinder heads on a 302 engine. The camshaft works well with...
- Dhs. 1,514.69 AED
- Dhs. 1,514.69 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam and Lifters Kit Ford 351WVendor: EdelbrockEdelbrock part #7182 Performer RPM Camshaft is designed for Ford 351W V-8 applications. This Edelbrock cam kit produced 400 HP & 412 ft-lbs. of torque when used with #7181 intake and #60259 cylinder heads on a 351W engine. The camshaft works well with high-performance's...
- Dhs. 1,508.26 AED
- Dhs. 1,508.26 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam and Lifters Kit Ford FE 352-428Vendor: EdelbrockEdelbrock part #7106 Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP & 434 ft-lbs. of torque when used with #7105 intake and #60069 cylinder heads on a 390 engine. The camshaft works well with...
- Dhs. 1,532.72 AED
- Dhs. 1,532.72 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam and Lifters Kit Olds 350-403Vendor: EdelbrockEdelbrock part #7112 Performer RPM Camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 397 HP & 400 ft-lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine. The camshaft works well...
- Dhs. 1,550.79 AED
- Dhs. 1,550.79 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam and Lifters Kit Pontiac 350-455Vendor: EdelbrockEdelbrock part #7157 Performer RPM Camshaft is designed for Pontiac 350-455 V-8 applications. This Edelbrock cam kit produced 422 HP & 441 ft-lbs. of torque when used with #7156 intake and #60599 cylinder heads on a 455 engine. The camshaft works well with high-performance's...
- Dhs. 1,473.59 AED
- Dhs. 1,473.59 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam and Lifters Kit67and Later Chev 396-454Vendor: EdelbrockEdelbrock part #7162 Performer RPM Camshaft is designed for big-block Chevy 396-427-454 V-8 applications. This Edelbrock cam kit produced 540 HP & 530 ft-lbs. of torque when used with #7163 intake and #60559 cylinder heads on a 454 engine. The camshaft works well with...
- Dhs. 1,384.42 AED
- Dhs. 1,384.42 AED
- Unit price
- per
-
Edelbrock Perf RPM Cam Lifters Kit Ford 429-460Vendor: EdelbrockEdelbrock part #7167 Performer RPM Camshaft is designed for Ford 429-460 V-8 applications. This Edelbrock cam kit produced 506 HP & 536 ft-lbs. of torque when used with #7166 intake and #60669 cylinder heads on a 460 engine. The camshaft works well with high-performance's...
- Dhs. 1,496.65 AED
- Dhs. 1,496.65 AED
- Unit price
- per
-
Edelbrock Perf RPM Manifold PolishedVendor: EdelbrockEdelbrock part #71011 Performer RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's, for maximum power and a broad torque curve for high- Performance'street/marine engines. Provides power like a single-plane and throttle response like a dual-plane. Has provisions to machine for an...
- Dhs. 1,978.85 AED
- Dhs. 1,978.85 AED
- Unit price
- per
-
Edelbrock Perf RPM Vortec ManifoldVendor: EdelbrockEdelbrock part #7116 Performer RPM Vortec intake manifold is Based on the powerful Edelbrock #7101, this single four-barrel intake is designed for the street rod, marine and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or...
- Dhs. 1,268.55 AED
- Dhs. 1,268.55 AED
- Unit price
- per
-
Edelbrock Perf T B I Manifold w/ EGRVendor: EdelbrockEdelbrock part #3704 Performer T.B.I. intake manifold is designed for 1987-95 305/350 c.i.d. 5.0/5.7L Chevy throttle body injected (T.B.I.) engines. Accepts all OEM equipment and small-bore (1-11/16") throttle body injectors only. Computer chip is supplied free of charge with proof of purchase of intake...
- Dhs. 1,696.14 AED
- Dhs. 1,696.14 AED
- Unit price
- per
-
Edelbrock Performer 2 8 Litre Manifold V6Vendor: EdelbrockEdelbrock part #3785 Performer 60-degree V6 intake manifold base is designed for 1982-85 2.8L 60 degree V6 Chevy longitudinal-mount engines used in light duty pick-ups and cars. Design features one manifold base and two interchangeable tops. The Edelbrock Performer 4V 60 degree V6 #3789...
- Dhs. 1,243.62 AED
- Dhs. 1,243.62 AED
- Unit price
- per
-
Edelbrock Performer 2-O w/ O EGR ManifoldVendor: EdelbrockEdelbrock part #2161 Performer 2-O intake manifold is designed for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. Will not fit under hood of Corvette without hood modifications. Will not fit "tall block" V8's. May be used with OEM or...
- Dhs. 1,290.88 AED
- Dhs. 1,290.88 AED
- Unit price
- per
-
Edelbrock Performer 229/4 3 V-6 ManifoldVendor: EdelbrockEdelbrock part #2111 Performer 90 degree V6 intake manifold is designed for street and marine 1985-95 200-229-262 c.i.d. (3.8 and 4.3L) Chevy V6s. Dual bolt pattern water neck fits both automotive and marine applications. Produced 18 more horsepower than an older manifold design on...
- Dhs. 1,276.08 AED
- Dhs. 1,276.08 AED
- Unit price
- per
-
Edelbrock Performer 289 w/ O EGR BlackVendor: EdelbrockEdelbrock part #21213 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8's. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more...
- Dhs. 1,465.69 AED
- Dhs. 1,465.69 AED
- Unit price
- per
-
Edelbrock Performer 289 w/ O EGR ManifoldVendor: EdelbrockEdelbrock part #2121 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8's. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range...
- Dhs. 1,058.63 AED
- Dhs. 1,058.63 AED
- Unit price
- per
-
Edelbrock Performer 302 4V Manifold w/ EGRVendor: EdelbrockEdelbrock part #3721 Performer 302 intake manifold is designed for carbureted 302 c.i.d. Ford V8's with EGR. Replaces the stock 4V EGR manifold using the stock 4V adapter. Manifold can be adapted for 4V use by using our #8053 4V EGR plate and the...
- Dhs. 1,364.11 AED
- Dhs. 1,364.11 AED
- Unit price
- per
