Products

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

aFe POWER Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2" mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator...

This MACH Force-Xp Hi-Tuck cat-back exhaust system exhaust delivers pure power and sound. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno (tested on 2015 GMC Canyon...

This MACH Force-Xp Hi-Tuck cat-back exhaust system exhaust delivers pure power and sound. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno (tested on 2015 GMC Canyon...

This MACH Force-Xp Hi-Tuck cat-back exhaust system exhaust delivers pure power and sound. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno (tested on 2015 GMC Canyon...

This system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. Specifically designed to replace the turn down tip or side exit...

Mach Force Xp Stainless Steel Axle Back Exhaust System w/ Polished Tips Ford Mustang GT 15-17 V8-5.0LThis Part Fits: Year Make Model Submodel 2015-2017 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017 Ford Mustang GT Premium

These quality made stainless steel fender support brackets are required when installing an aFe cat-back on your Demon. Add more power and sound to your Demon with these brackets and one of the aFe Power cat-back systems available. Stainless Steel Construction: These brackets are...

Stainless Steel Construction:This tip is constructed using 304 stainless steel for maximum strength and durability.High Gloss Black Finish:Powder coated in high gloss black finish for a quality, custom look.Laser Etched aFe POWER Logo:Branded with a laser etched aFe Power logo for quality authenticity.Secure Fitment:A...

Universal Fit:Universal tip - will fit to 3" exhaust tubing and is easy to install and adjustable. See below for specifications.

This direct-fit clamp-on tip is constructed from 304 stainless steel and features a polished finish for corrosion resistance for long lasting good looks. Designed to fit 3" exhaust systems; 3" inlet x 4-1/2" outlet and 9" inch length. This tip features a laser etched...

Upgrade your exhaust tip with this Mach Force-Xp 304 stainless steel, universal tip designed to fit most 2 1/2" exhaust systems. This 7" long, double-walled, slash cut high gloss black powder coated tip with a laser-etched aFe Power logo for a custom look. Completely...

Upgrade your exhaust tip with this Mach Force-Xp 304 stainless steel, universal tip designed to fit most 2 1/2" exhaust systems. This 7" long, double-walled, slash cut high gloss black powder coated tip with a laser-etched aFe Power logo for a custom look. Completely...

Unleash power and sound while improving the looks on your M3 Coupe with this MACH Force-Xp cat back system by aFe POWER. The larger diameter, mandrel-bent tubing along with high-flow stainless steel mufflers optimize the sound and looks of your vehicle. This 100% hand...

Performance Gains: This system produced gains of up to +18 HP and +27 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel tubing...

Introducing the new aFe Power MACH Force XP cat back exhaust system for the 07-13 BMW 328i E92 & E93 non-turbo. In recent testing, this system produced 4 horsepower and 8 lbs. x ft. of torque. This exhaust is constructed from 2.5in. brushed finish,...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are...

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is...

This MACH Force XP Hi-Tuck Axle-Back exhaust system is constructed of 2.5" mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and design of...

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes...

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes...

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes...

aFe is proud to introduce the aFe dual cat-back exhaust system. In recent testing this aFe cat-back exhaust system produced 34 horsepower and 43 lbs. x ft. of torque, furthermore, weighs 20 lbs. less than the stock exhaust. With the iconic 911 already a...

aFe is proud to introduce the aFe dual cat-back exhaust system. In recent testing this aFe cat-back exhaust system produced 34 horsepower and 43 lbs. x ft. of torque, furthermore, weighs 20 lbs. less than the stock exhaust. With the iconic 911 already a...

aFe is proud to announce the MACH Force-Xp cat-back exhaust system for the 2012-2117 Jeep Grand Cherokee SRT/SRT8 with the V8-6.4L HEMI engine. This exhaust system is constructed out of mandrel-bent 304 stainless steel tubing for unrestricted flow and is MIG-welded for strength and...

aFe is proud to announce the MACH Force-Xp cat-back exhaust system for the 2012-2017 Jeep Grand Cherokee SRT/SRT8 with the V8-6.4L HEMI engine. This exhaust system is constructed out of mandrel-bent stainless steel tubing for unrestricted flow and is MIG-welded for strength and durability....

Compatible with Factory Tips: This system is designed for use with the factory exhaust tips. Aggressive Sound: Free-flowing, transverse mufflers are to used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The mufflers are finished with...

Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position...

Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position...

aFe's Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2" mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator pipe...

This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" mandrel-bent stainless steel tubing and comes complete with free-flowing stainless steel, high temp black powder-coated muffler, OE style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased...

This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" mandrel-bent stainless steel tubing and comes complete with free-flowing muffler, OE style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps...

This MACH Force XP Cat-Back exhaust system is constructed of 2-1/2" mandrel-bent stainless steel tubing and comes complete with free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust...

aFe is proud to introduce the Cat-Back Exhaust System for the 2008 Volkswagen R32 MKV with the V6-3.2L engine. In recent testing this system produced 16 horsepower and 18 lbs. x ft. of torque. This exhaust starts out with 2.5" mandrel bent 304 stainless...

aFe power introduces the Hi-Tuck "Rock Basher" (RB) Cat-Back Exhaust System for 2007-2017 Jeep Wrangler (JK) with V6-3.6L/3.8L engines 2 and 4 door models. This cat-back exhaust system is constructed of 2-1/2" mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are...

This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter carbon fiber 304 stainless steel exhaust tips. The tips features...

This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter polished 304 stainless steel exhaust tips. The tips features a...

This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter satin black, ceramic coated, 304 stainless steel exhaust tips. The...

aFe POWER Mach Force-XP series cat-back exhaust system for the Toyota 4Runner with the V6-4.0L engine provides speed and style. Designed from 2-1/2" & 3" mandrel-bent, 304 stainless steel, this exhaust system offers greater flow to deliver more torque and horsepower than the factory...

aFe POWER Mach Force-XP series cat-back exhaust system for the Toyota 4Runner with the V6-4.0L engine provides speed and style. Designed from 2-1/2" & 3" mandrel-bent, 304 stainless steel, this exhaust system offers greater flow to deliver more torque and horsepower than the factory...

aFe POWER Mach Force-Xp axle-back exhaust system for the Ford Mustang with the L4-2.3L (t) EcoBoost & V6-3.7L engine utilizes 2-1/2 IN stainless steel tubing and incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. This system...

aFe is proud to introduce an all new Mach Force-Xp axle-back exhaust system for the 2015-2017 Ford Mustang with the I4-2.3L (t) EcoBoost & V6-3.7L engine. This axle-back exhaust system utilizes 2-1/2 in. stainless steel tubing and incorporates dual, high-flow mufflers to improve performance...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are...

aFe introduces the MACH Force XP dual axle-back exhaust system for the 11-14 Mustang GT V8-5.0L. In recent testing this system produced 18 horsepower and 15 lbs. x ft. of torque. This exhaust is constructed from 3 in. mandrel-bent, stainless steel and is MIG-welded....

aFe introduces the MACH Force XP dual axle-back exhaust system for the 11-14 Mustang GT V8-5.0L. In recent testing this system produced 18 horsepower and 15 lbs. x ft. of torque. This exhaust is constructed from 3 in. mandrel-bent, stainless steel and is MIG-welded....