Engine

Edelbrock part #2604 Performer Air-Gap intake manifold is designed for 1987-95 cast iron heads with canted center bolt holes small-block Chevys. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for...

Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This intake manifold combines a modern...

Edelbrock part #7594 RPM Air-Gap intake manifold is designed for street and high performance 308-383 c.i.d. Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads. This RPM Air-Gap manifold is a dual-plane design that is tuned for both excellent throttle response and...

Edelbrock part #75945 RPM Air-Gap EFI intake manifold is designed for street and high performance 308-383 c.i.d. Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads. This RPM Air-Gap manifold is a dual-plane design that is tuned for both excellent throttle response...

Edelbrock part #75013 RPM Air-Gap RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8's. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that...

Edelbrock part #75763 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. The RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. The Air-Gap design...

Edelbrock part #75213 RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8's. The RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that...

Edelbrock part #7159 Performer RPM intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" big-block engines with factory large port or with our Performer RPM "W"-series heads #60809 or #60819. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil...

Edelbrock part #7158 Performer RPM small port intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" big-block engines. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. For square-bore...

Edelbrock part #2891 Super Victor 440 intake manifold is designed for 413-440-500+ RB with standard or Max Wedge heads and 4500 Series carburetors. For competition and high-rpm Chrysler V8's, the Super Victor 440 has an all-new runner design that delivers maximum power from 3500...

Edelbrock part #2893 Super Victor 440 Max Wedge intake manifold is designed for 413-440-500+ RB with Max Wedge heads and 4500 Series carburetors. This intake manifold is designed to fit 1962-64 Max Wedge heads or the Edelbrock Victor Max Wedge cylinder heads #77939 and...

Edelbrock part #28095 Super Victor LS1/LS2 EFI intake manifold offers greater air flow potential for even bigger power gains, this manifold has been accepted by NASCAR for use in the Grand National West/Grand National East series. The Throttle body flange pad is 1.12" taller...

Edelbrock part #292851 Super Victor 8.2 EFI intake manifold is designed for high-rpm and competition 302-347 engines with aftermarket Windsor-style racing cylinder heads such as the Edelbrock Victor heads #77219 or Victor Jr. heads #77169. The Super Victor 8.2 is for engines with a...

Edelbrock part #29575 Victor Pontiac EFI intake manifold is designed for use with 389-455 EFI competition engines. It is ideal for drag racing (Super Stock, Super Gas, Super Comp, Brackets, etc.), marine or any application requiring maximum power up to 7500 rpm. Compatible with...

Edelbrock part #28097 Super Victor LS1 intake manifold offers greater air flow potential for even bigger power gains, this manifold has been accepted by NASCAR for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the...

Edelbrock part #28978 Super Victor II intake manifold is designed for use with large cubic inch big-block Chevy Tall-Deck engines using the latest design conventional rectangular port heads. This single-plane intake manifold is ideal for any 1,000+ horsepower drag race engine with high air...

Edelbrock part #7086 Victor Tunnel Ram top is for use with 4500 series carburetors (mounted in-line) and our Victor Tunnel Ram base manifold only on Big-Block Chevy applications. The Edelbrock Victor Tunnel Ram top also features a natural aluminum finish for a classic look....

Edelbrock part #2894 Victor Jr. Holden intake manifold is for use with competition 355+ c.i.d. Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads. This intake manifold is a single-plane design that is tuned for maximum air flow from 3500 to 7500...

Edelbrock part #28945 Victor Jr. Holden EFI intake manifold is for use with competition 355+ c.i.d. Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads. The Victor Jr. Holden is a single-plane design that is tuned for maximum air flow from 3500...

Edelbrock part #505651 Torker II Pontiac EFI intake manifold is designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. Can be used with Ram Air IV heads. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood. This manifold offers...

Edelbrock part #21163 Performer Vortec intake manifold is based on the popular and powerful Edelbrock #2101. This dual-plane intake is designed for the street rod, industrial and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or...

The Edelbrock #93661 Intake Valve is a 2.19" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60669 & #60689 Cylinder Heads. Overall Length: 5.175". Set of 1 Valve

The Edelbrock #9716 Intake Valve Seat is a replacement for Edelbrock Big-Block Chevrolet Cylinder Heads with 2.19" Intake Valves. Set of 1This Part Fits: Year Make Model Submodel 1963,1965-1975 Chevrolet Bel Air Base 1963,1965-1972 Chevrolet Biscayne Base 1973-1974 Chevrolet Blazer Base 1969-1972 Chevrolet Brookwood...

The Edelbrock #9713 Intake Valve Seat is a replacement for Edelbrock Pontiac Cylinder Heads with 2.11" Intake Valves. Set of 1This Part Fits: Year Make Model Submodel 1980-1981 Buick Century Base 1979 Buick Century Custom 1980-1981 Buick Century Estate 1979-1981 Buick Century Limited 1979...

The Edelbrock #9718 Intake Valve Seat is a replacement for Edelbrock Ford FE Cylinder Heads with 2.09" Intake Valves. Set of 1This Part Fits: Year Make Model Submodel 1958 Edsel Bermuda Base 1958 Edsel Citation Base 1958-1959 Edsel Corsair Base 1958 Edsel Pacer Base...

The Edelbrock #93662 Intake Valve is a 2.19" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60669 & #60689 Cylinder Heads. Overall Length: 5.175". Set of 8 Valves

Edelbrock part #15005 intake manifold gaskets for 1992-00 Honda D16 are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. Top quality Edelbrock gaskets ensure a perfect...

Edelbrock part #41144 aluminum coil covers and lid are designed for 2010-14 Camaro SS equipped with an Edelbrock supercharger part #1597 or #1598. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would...

Edelbrock part #1987 Airhorn Gasket kit is designed for use with Edelbrock Q-Jet Carb part #1901.

Edelbrock part #1998 Airhorn Gasket kit is designed for use with Edelbrock Q-Jet Carb part #1902.

Edelbrock part #97387 lifter installation kit provides the necessary components to install replacement hydraulic roller lifters in a 1996 and later B/B Chevrolet. Includes original-spec lifter guides and hold down spider.

Edelbrock part #97386 lifter installation kit provides the necessary components to install replacement hydraulic roller lifters in a 1987 and later S/B Chevrolet. Includes original-spec lifter guides and hold down spider.This Part Fits: Year Make Model Submodel 1991-1993 Buick Commercial Chassis Base 1992-1993 Buick...

Edelbrock part #9738 Performer-Plus lifter set for S/B & B/B Chevy is designed for use with Edelbrock Performer-Plus or equivalent camshafts. Sold in complete sets.This Part Fits: Year Make Model Submodel 1977,1980 Buick Century Base 1977-1979 Buick Century Custom 1980 Buick Century Estate 1978-1980...

Edelbrock part #9705 Performer RPM lifter set for B/B Ford FE is designed for use with Edelbrock Performer RPM or equivalent camshafts. Sold in complete sets.This Part Fits: Year Make Model Submodel 1978-1979 Ford Bronco Custom 1978 Ford Bronco Northland 1978-1979 Ford Bronco Ranger...

Edelbrock part #97393 high performance hydraulic roller lifters for FE Ford are the perfect match for street and high performance applications. With unsurpassed tolerance capable of high rpm power, these precision self-aligning retro-fit hydraulic roller lifters are designed for use in early model non-roller...

This Edelbrock Low Profile elbow was designed for limited hood clearance applications. This adaptor can be used with our 29085 Victor Jr LS1 but cowl trimming and an SS hood are required. The 3848 Elbow can be used in other square bore (4150 style)...

This Edelbrock Low Profile elbow was designed for limited hood clearance applications. This adaptor can be used with our 29085 Victor Jr LS1 but cowl trimming and an SS hood are required. The 38483 Elbow can be used in other square bore (4150 style)...

Edelbrock part #29087 Victor Jr. LS1 intake manifold is a high-rise single-plane intake capable of supporting up to 600 hp. The Victor Jr. LS1 features a flange that accepts a square-bore carburetors. It can be used on LS2 applications when matched with MSD's #6012...

The Edelbrock #2036 RPM Dual-Quad manifold and carb kit is designed for 390-428 Big-Block Ford FE applications. A huge hit among street rodders, this Dual-Quad Kits offer the ultimate set-up for anyone who wants the look and the performance of dual-quad carbs. The Edelbrock...

The Edelbrock #2020 Single-Quad Manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These kits...

The Edelbrock #2061 Single-Quad Manifold and carb kit is designed for Big-Block Chevy Oval Port applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These...

The Edelbrock #2021 Single-Quad Manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These kits...

The Edelbrock #2029 Single-Quad Manifold and carb kit is designed for Small-Block Chevy with Vortec or Edelbrock E-Tec Cylinder head applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks...

The Edelbrock #2063 Single-Quad Manifold and carb kit is designed for Big-Block Chevy Oval Port applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These...

The Edelbrock #2064 Single-Quad Manifold and carb kit is designed for Big-Block Chevy Rectangular Port applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These...

The Edelbrock #2004 Single-Quad Manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These kits...

The Edelbrock #2075 Single-Quad Manifold and carb kit is designed for Chrysler 340/360 applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These kits include:...

The Edelbrock #2033 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These kits...

The Edelbrock #2034 Single-Quad Manifold and carb kit is designed for Small-Block Ford 351-W applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These kits...

The Edelbrock #2062 Single-Quad Manifold and carb kit is designed for Big-Block Chevy Oval Port applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These...